The device is a low cost, compact and easy to use encoder based cable-extension transducer. The draw wire sensor provides an incremental encoder feedback signal.
Linear guide system, the direct determination of the guide element, such as: the length limit, gantry cranes, level measurement
Hydraulic system, with the piston-oriented systems or hydraulic cylinder, the displacement sensor deflection of these devices to collect data
Scalable systems, such as presses, lifts, bending machine, bending machine
Chains, cranes and cable winch to adjust, such as forklifts, stage equipment, lifts and cranes device.
Measuring Range :0~1000mm
Detection method : Incremental encoder
Revolution:0.1mm/pulse Rope :wire rope 1mm, Plastic coated wire rope ,rope maximum load: 16KG
Supply Voltage :24V Dc
Signals output : Pushpull with A B Z 3 channels
Red=VCC, Black = 0V, Green = A, White = B, Yellow = Z
The counter display
standard 96 × 48 × 82mm, 0 .56 inches 6 digitals display
Enter the 5V, 24V DC voltage and DC current 30mA signals.
1x position sensor +1x display